PDX680 Full Motion TV Wall Mount

PDX680

$ 150

Full Motion TV Mount

Meet PDX680, the standard in full motion mounts from Kanto.  Sitting a mere 2” from the wall and extending up to 24”, the PDX680 is the perfect solution for versatility.  PDX680 offers 18° of tilt and a 27” wall plate to accommodate up to 24” studs.  With integrated cable management and plastic caps to hide the lag bolts in the wall, the PDX680 is not only functional, but easy on the eyes too.

See Installation Video

TV Size 39″ – 80″
Max Weight 125 lb (57 kg)
Supports VESA 200×100 – 700×400
Extends 2″ – 24″ (5cm – 61cm)

MSRP: $149.99 USD

Where to Buy
Colour

Clear selection
SKU: N/A Categories: , ,

Features

Specifications

FAQ

With 24″ of extension, the PDX680 gives you unparalleled viewing options.

PDX680 Full Motion TV Wall Mount

LOW PROFILE DESIGN

The unique design of the PDX680 allows your TV to sit 2 inch’s from the wall when fully pushed in.

FITS VESA SIZES TO 700 x 400

The H Frame mounting bracket accommodates VESA sizes from 200×100 to 700×400.  The mounting arms come with plenty of options to raise or lower the TV depending on the VESA pattern on the TV.

MAGNETIC LAG BOLT COVERS

Magnetic covers go over the lag bolts to give the wall plate an elegant look.  Remove the covers when you install or remove the wall plate from the wall.

EXTENDS 24 INCHES

Even with its low-profile design the PDX680 can extend 24” from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves.

SUPPORTS 125 POUNDS

Designed with strength in mind, the PDX680’s solid steel frame can hold up to 125 lb (57 kg) with no concern, even at full extension.

PDX680 Full Motion TV Wall Mount
PDX680 Full Motion TV Wall Mount

SWIVELS UP TO 170 DEGREES

The articulating arms on the PDX680 allow for a maximum of 170 degrees (with a 39″ TV).  The larger the TV, the less swivel the PDX680 will have

TILT MECHANISM

The accessible tilt mechanism makes it easy to angle your TV 15° forward or 3° backward. Once you’ve found the best viewing angle, tighten the nuts to secure your TV in place.

SLEEK CABLE MANAGEMENT

Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides – whatever works best.

EVERYTHING YOU NEED

We supply you with everything except a toolbox to ensure that your installation goes smoothly. Instruction manuals are provided in English, French, and Spanish, as well as the parts you need to mount your TV safely and securely. Easy-to-follow online videos and phone support are available to assist you along the way.

CONVENIENT BOLT PACK

The PDX680 includes a labeled bolt pack with a variety of bolt diameters and lengths, as well as several spacers to allow a custom fit. Lag bolts and concrete anchors are provided so you can mount to wood studs and concrete walls.

Rotate the 360 degree image below.

INSTALLATION VIDEO

WALKTHROUGH VIDEO

SPECIFICATIONS

Specifications

TV Sizes: 39” to 80”
Weight Allowance: 125 lb (57 kg)
VESA Sizes: 200×100 to 700×400
Wall Plate: 27″ (68.5 cm); Accommodates dual studs with up to 24″ spacing

Features

Tilt: +15° to -3°
Swivel: 170° at full extension (with 39″ TV)
Extension: 24″ (61 cm) from the wall
Profile: Sits 2″ (5 cm) from the wall
Integrated cable management
Adjustable horizontal leveling
Magnetic plastic covers to hide lag bolts

General

Includes:
Paper wall template for marking pilot holes
Installation Manual
All mounting hardware for wood stud and concrete installation
Warranty: 5 years

Weights and Measurements

Shipping box weight: 27.5 lb (12.5 kg)
Shipping box dimensions: 33.9” x 13” x 3.9”
(86  x 33 x 10 cm)
Product weight: 23 lb (10.5 kg)
UPC: 800152715315

DOCUMENTATION

PRODUCT MANUALS

Make sure to check back here often whenever installing (or reinstalling) your product to make sure that you have the most up to date manual. Changes could include ratings, installation procedures, etc.

FAQ

What does VESA pattern mean and how do I check what VESA pattern my TV has?

VESA stands for Video Electronics Standard Association.  At its basic core, VESA is a family of standards for mounting flat panel monitors, televisions and other displays to stands or wall mounts.  To find out your VESA pattern size, simply measure the distance between the center of screw holes on the back of your TV on a vertical and horizontal plane.  For example, if your screw holes are 200mm apart both vertically and horizontally, your VESA size is 200 x 200.

Can I install my wall mount on a concrete or brick wall?

Yes you can. All of the TV mounts from Kanto come with the appropriate hardware to install your mount into both wooden studs and concrete walls.

Why should I only buy from an authorized Kanto reseller?

When it comes to customer service, we set the bar exceedingly high. Commitment of this level requires us to work closely with all our online and in-store retailers, so that we may ensure our customers receive the type of experience we try so hard to deliver.

If you are interested in purchasing a Kanto product, we encourage you to shop through one of the many authorized dealers listed above. This not only guarantees the quality of your purchase, but also gives you the benefit of our warranty should any issues arise. While we strive to support all our customers, we unfortunately cannot always provide assistance for products sold through unauthorized third parties.

If you are unsure if you are purchasing from an authorized retailer, please contact us toll-free at 1-888-848-2643 or email us at support@kantoliving.com.

Additional Information

Colour

Black