With its built-in soundcard, YU2 can stream high-quality audio directly from your computer’s USB port, or connect directly to any 3.5mm AUX jack for maximum input flexibility.
The 3” composite drivers provide distortion-free mid-range and bass tones – surprising performance for such a small speaker.
SILK DOME TWEETERS
YU2 features 3/4” silk dome tweeters to deliver clear crisp highs.
ACCESSIBLE VOLUME KNOB
Tucked neatly out of the way at the top of your active speaker, the smoothly rotating knob doubles as a power switch.
INPUTS AND OUTPUTS
Connect to the AUX input with the included Kanto 3.5mm cable to connect any device with a headphone jack to your YU2. Lighten the load on your computer’s CPU by connecting directly to YU2’s built-in DAC via a USB cable for a fully digital, high-quality audio connection. If you want a little more kick, connect a powered subwoofer.
KNURLED BINDING POSTS
The speaker connection from Active (LEFT) to Passive (RIGHT) uses high quality knurled binding posts. This standardized wiring system allows you to trim the included premium speaker wire to the desired length or purchase longer lengths for more versatility.
REAR BASS PORT
YU2 has a rear bass port that has been carefully designed and tuned to eliminate port turbulence while extending bass response.
WHAT’S IN THE BOX?
YU2 comes complete with a power cord, speaker wire, a 3.5mm mini-jack cable and an USB DAC cable to connect the speakers to your computer. The package also includes a manual and rubber feet.
Rotate the 360 degree image below.
Tweeters: 3/4 inch Silk Dome
Woofers: 3 inch composite
Amplifier Type: Class D
Nominal Impedance: 4 Ohm
Sensitivity 2.83V (/1W/1m): 84 dB
Frequency Response: 80 Hz – 20 kHz
Crossover System: 2-way
Crossover Frequency: 2.5 kHz
Inputs and Outputs
Inputs: 1 x 3.5mm stereo | mini-jack AUX | 1 x USB Audio DAC
Outputs: 1 x Subwoofer
Speaker Terminals: Left and Right Binding Posts
Input Sensitivity: 450 mV
Power Output: 25 Watts RMS per channel
Total Harmonic Distortion: < 0.1%
Input Voltage / Frequency: AC 100V-240V 50/60 Hz (auto switching)
Standby Power Consumption: < 0.5 W
Weights and Measurements
Dimensions (each speaker): 3.9” W x 5.3″ D x 5.9” H (10 x 13.5 x 15 cm)
Net Weight (active): 3.1 lbs (1.4 kg)
Net Weight (passive): 2.9 lbs (1.3 kg)
Gross Weight: 9 lbs (4.1 kg) (boxed pair)
Shipping Box Dimensions: 13.6″ x 8.7″ x 8.3″ (34.5 x 22 x 21.1 cm)
What’s in the Box?
3.5mm Audio cord
USB DAC Cable
Make sure to check back here often whenever installing (or reinstalling) your product to make sure that you have the most up to date manual. Changes could include ratings, installation procedures, etc.
Since the volume knob on the YU2 is located on the back panel, the most convenient way to adjust your volume is to turn the volume knob on the YU2 to about 50-75% (depending on your preference) and use your computer or device to adjust the volume.
Why should I only buy from an authorized Kanto reseller?
When it comes to customer service, we set the bar exceedingly high. Commitment of this level requires us to work closely with all our online and in-store retailers, so that we may ensure our customers receive the type of experience we try so hard to deliver.
If you are interested in purchasing a Kanto product, we encourage you to shop through one of the many authorized dealers listed above. This not only guarantees the quality of your purchase, but also gives you the benefit of our warranty should any issues arise. While we strive to support all our customers, we unfortunately cannot always provide assistance for products sold through unauthorized third parties.
If you are unsure if you are purchasing from an authorized retailer, please contact us toll-free at 1-888-848-2643 or email us at firstname.lastname@example.org.